that1guytim - Comments

The EPL is fully licensed in FM26, so you shouldn't need any additional kits for them. They're already in the game unless you added something that is overriding their in-game kits. However, here are their kits pulled straight from the game. 

This is not a converter at all. It is simply an online viewer for FM26 3D Kits and Balls.

It's been updated. 

Change log:

• Updated the UI
• Added the 3D Ball Viewer
  • Select it via the Ball button in the Viewer section.
• Added Animations.
  • Bar is centered at the bottom.
  • This is mainly for the 3D Ball Viewer.
  • All but None and Hover are disabled for the 3D Kit Viewer.
• Updated the lighting to give users control over the direction and strength of the source light.
  • Light yaw & Light tilt
  • Biggest impact to this is the Ambient light setting
• Clicking on the “Reload Parts” button now clears any texture you've loaded onto the models.

You will likely have to click on the screen/view port for the models to appear properly. Still trying to sort this out…

One other thing that I discovered and found interesting is SI seems to have made the ball models with textures baked in. I was able to extract the SI ball texture… not sure if this has been shared by anyone yet, but it's below. I've validated that putting this image on the model does indeed map correctly to the ball. It also looks like they're using two ball models, one for SI and one for the EPL. For winter ball changes, they're just using direct ball textures  (fmfc_bc_winter.png, bundesliga_winter_bc.png, spfl_winter_bc.png, efl_cup_winter.png, efl_winter_bc.png, premier_league_winter_bc.png). 

Also, apologies for all the posts just by me, lol. Just updating as I go along.

I'm not sure what you're asking here exactly to be honest. This is for you to put 3d kits you've made or downloaded onto, to view outside of the game. It allows you to validate they look right and everything aligns how you want it to for when you put that texture in game.

It is, but not super easily at the moment. I can play around a bit more and see if I can create a bat file or something that allows you to download the repository and then run the bat to have it open locally in your browser.

I also need to put together some notes for a readme and maybe do a little more polish, but for now it'll run from the GitHub link like it did when I had it running locally while I was building it.

I'll look into it. Shouldn't be that difficult, I don't believe. 

Put together an online FM26 3D Kit & Ball Viewer. It can be found here: https://that1guytim.github.io/fm26-3dkit-viewer/

FM26 3D Kit & Ball Viewer

How to use it:

1. Open the page
2. It defaults to the 3D Kit Viewer. If you want to view the ball, just click the Ball button.
   • At the moment, when you load the model or change the model between male/female/ball, please click on the “Reset Position” button or click and move your mouse on the loaded space to properly bring the models into view properly… (I'm working to fix this)
3. You can either drag and drop your 3D Kit or Ball textures onto the page to load them or just browse to them manually via the Browse… button.
4. Your texture is now loaded onto the model!
5. To unload your texture from the model, click on the “Reload Parts” button

3D Kit Viewer Specific Settings/Options:

1. You can change between Male/Female
2. The viewer defaults to untucked shirts/shorts. You can change this by selecting Tucked “No” to “Yes”.
3. I included the long sleeve under shirt on the Short sleeve option so you can see how that looks for players who decide to wear the “UnderArmour”. The color/look comes from your texture directly
4. You can animate the model, but just with the Hover option… the others make the model look silly, so I disabled them by default when on the Kit viewer.

There are also other optional settings you can play with…

1. Lighting
   • I've included various lighting settings you can adjust. The “Follow Cam” check box makes it so that the camera keeps the lighting angle at a set point no matter where you rotate/spin the model around to. If you uncheck it, the lighting follows the model as you move it.
2. Animations
   • I added animations in v2.0 of the viewer. They're mostly useful for the 3D Ball Viewer. All but “None” and “Hover” are disabled for the 3D Kit Viewer.

FAQ:

1. How do I download the textures?
   • There are no textures to download. This is just an online viewer for you to load your own or downloaded custom made 3D Kit or Ball textures.
2. Will this convert [GAME] to [GAME] textures?
   • No. This is just an online viewer for you to utilize FM26 specific 3D Kit and Ball textures.

Enjoy! Let me know if you have any issues or suggestions!

Screen Shots:

Change Logs:

Version 1.0

Version 2.0

Other Notes/Things I discovered in v2.0:

Show Spoiler

One other thing that I discovered and found interesting is SI seems to have made the ball models with textures baked in. I was able to extract the SI ball texture… not sure if this has been shared by anyone yet, but it's below. I've validated that putting this image on the model does indeed map correctly to the ball. It also looks like they're using two ball models, one for SI and one for the EPL. For winter ball changes, they're just using direct ball textures  (fmfc_bc_winter.png, bundesliga_winter_bc.png, spfl_winter_bc.png, efl_cup_winter.png, efl_winter_bc.png, premier_league_winter_bc.png). 

 

Here ya go: https://sortitoutsi.net/content/75994/fm26-online-3d-kit-viewer Made a post for it.

Hopefully it works fine for you. If the model ever disappears, just click in the grey space and move your mouse around a bit. You can drag and drop the kits onto the page and it'll load them, or you can manually browse to them. There's also lighting settings if you want to play with that. 

So I've been playing with making one and I do have a WIP 3D kit viewer I'm nearly done with. I just need to fix/adjust a few minor details and it should be ready for use/testing. I need to adjust it so the lighting stays where we're viewing so it makes the kits more visible.

This! I was literally going to ask then I saw this post.

Follo FK

Norway PostNord-ligaen Avdeling 2

25/26 (FM26)

Here's a Macron Tureis PSD I put together. If someone uses it and something looks off, let me know. 

Also to note, the shorts, I didn't transfer over with this. I just built it on top of a different FM 26 Macron kit and left those shorts in.

https://pixeldrain.com/u/194sy9p9

Sure, can do if not done already by you.

I plan on it. Had taken a short break due to holidays and getting back into work. Might be a little slow due to work really ramping up for me, but I plan on doing more.

@bolid74 Did the best I could. Hopefully this is up to snuff. If something looks off, please let me know. I didn't move the shorts over, just a FYI

PSD

https://pixeldrain.com/u/194sy9p9

The requests thread is pinned here: https://sortitoutsi.net/content/74975/3d-kits-fm-26-request-thread

No worries. I'll just finish up what I'm working on and share. You can adjust as you see fit for you template pack if you want or just re-do it!

Currently in process of re-making the Mac Tureis kit in FM26 style for my Norway PostNord/OBOS kits – Follo uses it. Will share the PSD after done unless someone else has already made it...(@bolid74 ?) Working on the collar internal lines at the moment.

No fix for this yet. Still a known bug that the home screen will display custom 3d kits incorrectly. 

Eidsvold Turnforening

Norway PostNord-ligaen Avdeling 2

25/26 (FM26)

Asker Fotball

Norway PostNord-ligaen Avdeling 2

25/26 (FM26)

Also just a note to anyone that may have downloaded it… the fmslovakia 2D FC’12 Norway - PostNord-ligaen 2025 pack, has the 2nd kit wrong for Asker. Asker uses the Adidas Squadra 25 kit. 

You can see their Away kit here… well most of it anyway

I might work through more of the Norway lower levels club kits (PostNord - OBOS)… we'll see. Depends on motivation lol I know the Eliteserien was already done.

Been a while since I've done this. Only did these because it's who I'm playing currently. Haven't tested yet, just finished both. Let me know if any issues.

Alta IF 

Norway PostNord-ligaen Avdeling 2

25/26 (FM26)

Seems a little uncalled for… @monz 

Edit: Sorry for bumping this, but no one responded.

As far as I know there isn't a way to get your staff to setup anything other than very basic training.

You, however, can create training schedules and then go to your training calendar and apply the schedules to all weeks however you'd like.

Just go to Training → Schedules → Select Schedule… → + Create New Schedule. Once you click on Create New Schedule, select whatever you want to train on each day, then Save the schedule with whatever name you want to give it. After this, go over into: Training → Calendar and on the week you want to apply the new schedule, click on the training name droplist above that week → Custom Schedules → Select your newly created schedule.

Just repeat this for however many different types of training weeks you want. Also, when you're setting this up, you can set specific week days in your custom training schedule to be set as a match day. Doing this allows you to select the trainings like “Match Preview” the day before the match and “Match Review” the day after the match.

Hope this helps. Screenshot steps below.

Got it. Thanks for that. Sorry for the confusion/misstep.

Gotcha. It's the eyes that throw me off when I rotate those types. It bugs me and makes it seem like they're not looking straight any more. I'm just a weirdo though lol.

Missed some issues on the neck from the original source that had to be cleaned up

Understood. Was just going through Alta's website and didn't realize the picture was that old. It also looked quite a bit newer than the current facepack image. You're right though…. now that I look all of the images on their site are from 2020.

Florø (NOR) Team ID: 5000210

Appreciate it! I missed the video when I was scrolling through.